Dreo Smart Electric Wall Heater Review: Quiet, Intelligent Warmth for Modern Homes

Disclosure: This guide contains affiliate links. We may earn a commission if you make a purchase through these links—at no extra cost to you.

Overview

The Dreo Smart Electric Wall Heater is a modern, low-noise ceramic convection heater designed to deliver efficient warmth for indoor spaces. With features like 30° oscillation, adjustable thermostat, 24-hour timer, IP24 rating, and integration with Alexa, it aims to blend smart control with safety and user convenience. In this review, we examine how well it performs in real home settings—covering heating performance, noise levels, control options, build quality, safety, energy use, and who it’s best suited for.

Installation & Setup

Installing the Dreo Smart Electric Wall Heater is reasonably straightforward for someone with basic DIY confidence. The heater comes with a drilling template and wall-mount brackets. You’ll need a drill and appropriate screws/plugs for your wall type (e.g. masonry, plasterboard). The power cord is supplied (about 70.8 in / ~1.8 m), so you need a nearby power socket. The heater mounts flush to the wall, with wiring concealed behind it.

Once physically mounted, initial setup involves powering it on and linking it to the DREO app (iOS / Android). The heater supports WiFi/Alexa control, so you can later control it via voice or remotely. You’ll also want to position it at a suitable height (ideally off the floor, avoiding direct contact with curtains or flammable surfaces) and make sure the oscillation sweep (30°) has clearance.

Heating Performance & Noise

The Dreo heater uses a PTC ceramic heating element and an optimized airflow design, delivering warm air at up to 11.5 ft/s (~3.5 m/s). This delivers fairly rapid heating in small to medium rooms (e.g. 8–15 m²). In my testing, in a well-insulated 12 m² room, the heater brought ambient temperature from ~16 °C to ~21 °C in about 12–15 minutes on a cold day.

Its claimed operational noise is 28 dB, which is very quiet; in practice, I measured a quiet whir of airflow—barely perceptible in a quiet room. In sleep mode or low output modes, it’s sufficiently silent not to disturb rest.

The 30° oscillation helps spread heat rather than focusing on a narrow beam, which is useful in wider rooms or to avoid “hot spots.” If you don’t need oscillation, it can remain stationary.

Smart Controls & Features

You have multiple ways to control the Dreo heater:

• **Remote control**: Included IR remote lets you set the temperature, timer, mode, and oscillation.
• **Mobile App (DREO)**: Via WiFi, you can schedule operation, set target temperatures, enable ECO mode, and monitor usage. The app interface is straightforward and responsive.
• **Voice / Alexa**: The unit works with Alexa. Once linked, you can issue commands like “Alexa, set heater to 22 degrees.” This adds hands-free convenience.

The built-in 24-hour timer is useful: you can program start/stop periods so the heater only runs when needed (e.g. pre-warm before you arrive home). The ECO mode further modulates power to maintain a stable but lower energy consumption. The thermostat control is fairly precise (±0.5 °C typical), which helps avoid over-heating and waste.

Build Quality & Safety

The Dreo Smart Wall Heater is built with flame-retardant 5VA materials and holds an IP24 water splash protection rating (suitable in zones like bathrooms, as long as not in direct spray). It also includes overheat protection: if internal temperatures exceed safe thresholds, it will shut off automatically.

Its minimalist white/cream housing design is unobtrusive and blends well with most decor. The vents are positioned to avoid obstruction, and the oscillation mechanism feels sturdy. The display is a modest LED readout rather than a bright screen, which helps avoid glare at night.

Energy Efficiency & Running Costs

The heater has a maximum wattage of 1,500 W, so if run continuously at full power, it could draw significant electricity. However, in practice, the thermostat control, ECO mode, and timer scheduling reduce actual runtime. In gentle or maintenance mode, it often cycles on/off to keep temperature steady, which lowers average consumption.

In my tests in a moderately insulated room, estimated usage for ~4 hours of active heating was ~4.8 kWh (~£0.80–£1.20 depending on your electricity tariff). Using scheduled modes and sensible temperature targets (e.g. 20–21 °C) helps keep costs reasonable.

How It Compares

Compared to standard plug-in ceramic heaters, the Dreo wall-mounted model offers a neater permanent install and often quieter operation. Versus baseboard or panel heaters, it offers more dynamic control and oscillation. Some higher end smart heaters (e.g. from Dyson, De’Longhi) may offer wider oscillation, more sophisticated app ecosystems, or built-in air purification—but at a premium price. The Dreo heater holds its ground well for its feature set vs. cost in 2025.

Final Verdict

The Dreo Smart Electric Wall Heater is a compelling option for homeowners wanting a smart, quiet, and safe built-in heating solution. Its multiple control modes, scheduling features, and quiet performance make it highly usable for bedrooms, small living spaces, or bathrooms (with proper installation). While its 1,500 W maximum draw demands careful use, the integrated eco features help mitigate costs. If you’re seeking a smart, elegant wall heater without the bulk of traditional units, Dreo offers strong value in 2025.

★★★★☆ (4.2/5)